*** کمک فوری در مورد Share folder & DC ***
سلام به همه دوستان لطفا منو راهنمایی کنید بدجوری به مشکل خوردم
شرکت ما 35 تا کلاینت داره که همه هم عضو دامین هستن ، یه روز صبح که آمدم شرکت دیدم شیر فولدر که از روی سرور اصلی (DC) بود باز نمیشه وقتی سراغ سرور رفتم با پیغام خطا های زیر روبرو شدم
بیشتر سرویس های شبکه هم اجرا نمیشن و پیغام خطا مثل زیر نمایش داده میشه
روی این سرور اتوماسیون اداری نصب هست که نمیتونم بهش زیاد دست بزنم چون پشتیبانی نداره و بپره بیچاره میشم ولی الان فقط از روی سرور اتومایسون اداری تحت وب اجرا میشه و دیگر هیچ ...
تو این قیمت همه شیر ها رو روشن میکنم بلافاصله خاموش میشه
لطفا راهنمایی کنید شرکت رو هوا رفته ...
13 پاسخ
سلام
اول از همه از اطلاعات یک پک آپ بگیرین و بعد سرور رو ریست کنید ببینید درست میشه
اگر درست نشد با آنتی ویروس اسکن کنید
The DNS server could not open socket for address 192.168.1.200.
Verify that this is a valid IP address for the server computer. If it is NOT valid use the Interfaces dialog under Server Properties in the DNS Manager to remove it from the list of IP interfaces. Then stop and restart the DNS server. (If this was the only IP interface on this machine and the DNS server may not have started as a result of this error. In that case remove the DNS\Parameters\ ListenAddress value in the services section of the registry and restart.)
If this is a valid IP address for this machine, make sure that no other application (e.g. another DNS server) is running that would attempt to use the DNS port.
For more information, see "DNS server log reference" in the online Help.
در event چی ثبت شده؟
سلام
دوست عزیز اول ویندوز سرورت چیه ؟
آنتی ویروس داری یا خیر ؟
ریموت از طریق اینترنت به سرور می زدین ؟ با rdp .....
چندین بار هم ریست کردم ولی درست نشده
یه کار می تونی بکنی ، زحمت بکشی از اول بریم جلو
راستش تا حالا انقدر خطا با هم ندیدم ولی دوست دارم کمک کنم حل بشه اگه بتونم
اول ببین از حالت دامین خارج نشده باشی .
بعد تنظیم ip و ارتباط رو چک کن .
خطا زیاد داره اینها تعدادی از خطا های ثبت شده است
Duplicate event log entries were suppressed.
See the previous event log entry for details. An entry is considered a duplicate if the event code and all of its insertion parameters are identical. The time period for this run of duplicates is from the time of the previous event to the time of this event.
Event Code:
8000082c
Number of duplicate entries:
29
Scope, 192.168.0.0, is 84 percent full with only 14 IP addresses remaining.
The DHCP service failed to see a directory server for authorization.
سرور از حالت دامین خارج نشده چون هنوز کاربرها و خود سرور با دامین لاگین میکنه ولی وارد تنظیمات دامین تو سرور نمیتونم بشم پیغام خطا میده ولی آی پی دیگه نمیتونن بگیرن یعنی DHCP کار نمیکنه و امروز یکی از کلاینت هر کاری کردم دیگه آی پی نگرفت مجبور شدم آی پی دستی براش ست کنم تا بتونه تو شبکه کار بکنه
ویندوز سرور 2008 R2 هست
ریموت فقط داخلی میزنیم بهش نه از طریق اینترنت
آنتی ویروس و آنتی ورم هر دو روش نصب هست به روز هم هستن هر دو
The DNS server could not bind a Transmission Control Protocol (TCP) socket to address 192.168.1.200. The event data is the error code. An IP address of 0.0.0.0 can indicate a valid "any address" configuration in which all configured IP addresses on the computer are available for use.
Restart the DNS server or reboot the computer.
This server is the owner of the following FSMO role, but does not consider it valid. For the partition which contains the FSMO, this server has not replicated successfully with any of its partners since this server has been restarted. Replication errors are preventing validation of this role.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=RID Manager$,CN=System,DC=TT,DC=Com
User Action:
1. Initial synchronization is the first early replications done by a system as it is starting. A failure to initially synchronize may explain why a FSMO role cannot be validated. This process is explained in KB article 305476.
2. This server has one or more replication partners, and replication is failing for all of these partners. Use the command repadmin /showrepl to display the replication errors. Correct the error in question. For example there maybe problems with IP connectivity, DNS name resolution, or security authentication that are preventing successful replication.
3. In the rare event that all replication partners being down is an expected occurance, perhaps because of maintenance or a disaster recovery, you can force the role to be validated. This can be done by using NTDSUTIL.EXE to seize the role to the same server. This may be done using the steps provided in KB articles 255504 and 324801 on http://support.microsoft.com.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.